What for? To increase traffic and distract/smokescreen?

On Thu, 9 Nov 2023 21:26:26 +0000, Anonymous <nobody@yamn.paranoici.org> wrote:
>What for? To increase traffic and distract/smokescreen?

(using Tor Browser 13.0.1)
https://duckduckgo.com/?t=h_&q=dummy+site%3A+danner-net.de
>Only showing results from danner-net.de
>https://www.danner-net.de > omom > tutorwme.htm
>OmniMix * Tutorial * Whole Message Encryption (WME)
>At the 'Dummy Load' page of the 'WME' section you're able to randomly increase
>the size of your mail. This measure prevents adversaries from estimating the
>kind of message, whether it's about a usually shorter text or a more voluminous
>data transfer. Request a message-specific dummy load by sending the desired
>block size range ('O-Wme-Dummy ...
>www.danner-net.de > omom > tutorquickstart.htm
>OmniMix * Tutorial * Quick Start
>To do so go to the 'Misc' > 'Dummy' tab and click 'Send Dummy Message'. Watch
>the message's processing at the 'Log' tab. After OmniMix passed the test it's
>time to compose and send your first real message from the 'Mailer' tab on the
>far right. Enter the mail's 'Destination', 'Subject' and 'Body' text and click
>'Send', finally click 'OK' to ...
>https://www.danner-net.de > omom > tutorremail.htm
>OmniMix * Tutorial * Remailing
>Go to the 'Misc' > 'Dummy' tab and press the 'Send Dummy Message' button.
>OmniMix then sends a mail that includes all necessary directives to its own SMTP
>server, which itself tries to forward it to the Mixmaster network. The 'Log'
>list informs you about any problem during this process. If your computer is
>connected with the Internet, but you ...
>https://www.danner-net.de > omom > tutorremailchains.htm
>OmniMix * Tutorial * Remailing * Remailer Chains
>To increase traffic and fill their pools up to the critical level within a
>reasonable amount of time aiming at an acceptable latency, remailers currently
>have to launch dummy messages. But those are an insufficient substitute, as they
>are discarded in the end at some remailer and don't add to the output of the
>whole system.
>https://www.danner-net.de > omom > tutorconfigprogram.htm
>OmniMix * Tutorial * Configuration * Program
>Then finally you may have to set the 'Passphrase' at the 'Cert' tab, which is
>'omnimix' for the dummy certificate. Read about creating your individual server
>certificate in the chapter below dedicated to that topic. If all server status
>lamps become green (or in 'Simulation' mode yellow), OmniMix listens to the side
>of your mail / news client. ...
>www.danner-net.de > omom > tutornymreceive.htm
>OmniMix * Tutorial * Nyms * Receiving Nym Messages - danner-net.de
>And additional irrelevant dummy messages ('Messages') can be put between the
>downloads of real nym replies. Furthermore OmniMix may vary the message
>processing time ('Delay') randomly to prevent timing analyses. All that has to
>be adjusted at the 'NwsNym' > 'Access' tab. Nevertheless, if you aim at maximum >
>security you have to follow a ...
>https://www.danner-net.de > omom > tutorcertserver.htm
>OmniMix * Tutorial * Server Certificate Creation
>For a quick deployment without obstacles the distribution package encloses a
>dummy certificate. But for security reasons this should quickly be replaced by
>an individual certificate using a different passphrase of appropriate
>complexity. OmniMix assists you in creating your own self-signed certificate.
>This has to be done at the 'Cert ...
>www.danner-net.de > omom > tutornym.htm
>OmniMix * Tutorial * Nyms
>Passphrase for the asymmetrical PGP public/private key pair of the nym. * Seed
>for the series of passphrases needed as arguments for the 'Encrypt-Subject' and
>'Encrypt-CAST' commands within the reply block(s) (more information on that
>topic in the chapter 'Passphrase creation for reply blocks').
> https://www.danner-net.de > omom > tutornymreceive.htm
> OmniMix * Tutorial * Nyms * Receiving Nym Messages
> And additional irrelevant dummy messages ('Messages') can be put between
>the downloads of real nym replies. Furthermore OmniMix may vary the message
>processing time ('Delay') randomly to prevent timing analyses. All that has to
>be adjusted at the 'NwsNym' > 'Access' tab. Nevertheless, if you aim at maximum
>security you have to follow a ...
> www.danner-net.de > omom > tutorconfigprogram.htm
> OmniMix * Tutorial * Configuration * Program
> Then finally you may have to set the 'Passphrase' at the 'Cert' tab, which
>is 'omnimix' for the dummy certificate. Read about creating your individual
>server certificate in the chapter below dedicated to that topic. If all server
>status lamps become green (or in 'Simulation' mode yellow), OmniMix listens to
>the side of your mail / news client. ...
> www.danner-net.de > omom > tutorcertserver.htm
> OmniMix * Tutorial * Server Certificate Creation
> For a quick deployment without obstacles the distribution package encloses
>a dummy certificate. But for security reasons this should quickly be replaced by
>an individual certificate using a different passphrase of appropriate
>complexity. OmniMix assists you in creating your own self-signed certificate.
>This has to be done at the 'Cert ...
[end quote]

On 11/9/2023 1:26 PM, Anonymous wrote:

> What for? To increase traffic and distract/smokescreen?
>

Cover traffic.

Anonymous wrote:

>What for? To increase traffic and distract/smokescreen?

To counter end-to-end correlation attacks.

In article <20231109.212626.6850da89@yamn.paranoici.org>
Anonymous <nobody@yamn.paranoici.org> wrote:
>
> What for? To increase traffic and distract/smokescreen?

You don't want people knowing you are posting from Philly, do
you?