Which command on the command line updates mlist2.txt and pubring.mix ?

On 2021-06-08 4:39 a.m., Anonymous wrote:
> Which command on the command line updates mlist2.txt and pubring.mix ?
>

That's a good question. I struggled with this one too. The only method
that worked for me was to actually send out a message.

yamn --mail message.txt

This guarantees that your stats and keys will get updated.

--
SEC3

SEC3 wrote:
>
>> Which command on the command line updates mlist2.txt and pubring.mix ?
>>
>
> That's a good question. I struggled with this one too. The only method
> that worked for me was to actually send out a message.
>
> yamn --mail message.txt
>
> This guarantees that your stats and keys will get updated.
>
> --
> SEC3

No elegant solution !

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
Message-Id: <Y4KvI.283117$ImK8.56175@fx04.ams1>:

> On 2021-06-08 4:39 a.m., Anonymous wrote:
>> Which command on the command line updates mlist2.txt and pubring.mix ?
>>
>
> That's a good question. I struggled with this one too. The only method
> that worked for me was to actually send out a message.
>
> yamn --mail message.txt
>
> This guarantees that your stats and keys will get updated.

Hi,

Yes, you're right, there is no manual option to update stats and
keyrings. On every message send, it checks to see if the stats/keys are
more than 1 hour old and updates if they are.

I've added an option to provide a manual means to refresh stats and
keyrings:

yamn --refresh

This is compiled against Go 1.16.4 and incorporates current versions of
all the dependency libraries.
https://github.com/crooks/yamn

-----BEGIN PGP SIGNATURE-----
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=pLCG
-----END PGP SIGNATURE-----

--
pub 1024D/228761E7 2003-06-04 Steven Crook <steve@mixmin.net>
Key fingerprint = 1CD9 95E1 E9CE 80D6 C885 B7EB B471 80D5 2287 61E7
ssb rsa4096/832C8F4DCD904263 created: 2019-05-04 expires: 2024-05-02 usage: S

On Saturday, June 26, 2021 at 1:37:44 PM UTC+2, Zax wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
> Message-Id: <Y4KvI.283117$ImK8....@fx04.ams1>:
> > On 2021-06-08 4:39 a.m., Anonymous wrote:
> >> Which command on the command line updates mlist2.txt and pubring.mix ?
> >>
> >
> > That's a good question. I struggled with this one too. The only method
> > that worked for me was to actually send out a message.
> >
> > yamn --mail message.txt
> >
> > This guarantees that your stats and keys will get updated.
> Hi,
>
> Yes, you're right, there is no manual option to update stats and
> keyrings. On every message send, it checks to see if the stats/keys are
> more than 1 hour old and updates if they are.
>
> I've added an option to provide a manual means to refresh stats and
> keyrings:
>
> yamn --refresh
>
> This is compiled against Go 1.16.4 and incorporates current versions of
> all the dependency libraries.
> https://github.com/crooks/yamn

Updated sec3's YAMN Tutorial link (Remailer Section) for the new binaries.

Regards
Stefan

On Saturday, June 26, 2021 at 5:37:58 PM UTC+2, Stefan Claas wrote:
> On Saturday, June 26, 2021 at 1:37:44 PM UTC+2, Zax wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA256
> >
> > On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
> > Message-Id: <Y4KvI.283117$ImK8....@fx04.ams1>:
> > > On 2021-06-08 4:39 a.m., Anonymous wrote:
> > >> Which command on the command line updates mlist2.txt and pubring.mix ?
> > >>
> > >
> > > That's a good question. I struggled with this one too. The only method
> > > that worked for me was to actually send out a message.
> > >
> > > yamn --mail message.txt
> > >
> > > This guarantees that your stats and keys will get updated.
> > Hi,
> >
> > Yes, you're right, there is no manual option to update stats and
> > keyrings. On every message send, it checks to see if the stats/keys are
> > more than 1 hour old and updates if they are.
> >
> > I've added an option to provide a manual means to refresh stats and
> > keyrings:
> >
> > yamn --refresh
> >
> > This is compiled against Go 1.16.4 and incorporates current versions of
> > all the dependency libraries.
> > https://github.com/crooks/yamn
> Updated sec3's YAMN Tutorial link (Remailer Section) for the new binaries.

Direct link, for the binaries:

<https://ipfs.io/ipfs/QmWwAFM5p1RkokAZhttfSExzc7BHnAhrxCjSHatqXAEFZX/yamn-master/binaries>

Regards
Stefan

Steve <admin@mixmin.net> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
> Message-Id: <Y4KvI.283117$ImK8.56175@fx04.ams1>:
>
> > On 2021-06-08 4:39 a.m., Anonymous wrote:
> >> Which command on the command line updates mlist2.txt and pubring.mix ?
> >>
> >
> > That's a good question. I struggled with this one too. The only method
> > that worked for me was to actually send out a message.
> >
> > yamn --mail message.txt
> >
> > This guarantees that your stats and keys will get updated.
>
> Hi,
>
> Yes, you're right, there is no manual option to update stats and
> keyrings. On every message send, it checks to see if the stats/keys are
> more than 1 hour old and updates if they are.
>
> I've added an option to provide a manual means to refresh stats and
> keyrings:
>
> yamn --refresh
>
> This is compiled against Go 1.16.4 and incorporates current versions of
> all the dependency libraries.
> https://github.com/crooks/yamn
>
> SNIP

Great ! Thank you so much, Steve

Will you also compile the program for us stupids Windows users ? And publish
the Windows version on http://news.mixmin.net/ ?

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On Sat, 26 Jun 2021 17:23:39 +0000, YAMN USER wrote in
Message-Id: <f5887d0f5ca6d4356a46c219c5ad53f3@msgid.frell.theremailer.net>:

> Will you also compile the program for us stupids Windows users ? And publish
> the Windows version on http://news.mixmin.net/ ?

Hi, I'll try and do this tomorrow. I have to dust off a Windows PC,
patch it and get the latest Go binaries installed.

-----BEGIN PGP SIGNATURE-----
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=ZB/t
-----END PGP SIGNATURE-----

--
pub 1024D/228761E7 2003-06-04 Steven Crook <steve@mixmin.net>
Key fingerprint = 1CD9 95E1 E9CE 80D6 C885 B7EB B471 80D5 2287 61E7
ssb rsa4096/832C8F4DCD904263 created: 2019-05-04 expires: 2024-05-02 usage: S

In article <slrnsde4c7.fqr.admin@fleegle.mixmin.net>
Zax <admin@mixmin.net> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
> Message-Id: <Y4KvI.283117$ImK8.56175@fx04.ams1>:
>
> > On 2021-06-08 4:39 a.m., Anonymous wrote:
> >> Which command on the command line updates mlist2.txt and pubring.mix ?
> >>
> >
> > That's a good question. I struggled with this one too. The only method
> > that worked for me was to actually send out a message.
> >
> > yamn --mail message.txt
> >
> > This guarantees that your stats and keys will get updated.
>
> Hi,
>
> Yes, you're right, there is no manual option to update stats and
> keyrings. On every message send, it checks to see if the stats/keys are
> more than 1 hour old and updates if they are.
>
> I've added an option to provide a manual means to refresh stats and
> keyrings:
>
> yamn --refresh
>
> This is compiled against Go 1.16.4 and incorporates current versions of
> all the dependency libraries.
> https://github.com/crooks/yamn

Zax! So nice to see a post from you.

Are you going to update with V3 onion soon?

On 2021-06-26 11:39 a.m., Stefan Claas wrote:
> On Saturday, June 26, 2021 at 5:37:58 PM UTC+2, Stefan Claas wrote:
>> On Saturday, June 26, 2021 at 1:37:44 PM UTC+2, Zax wrote:
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA256
>>>
>>> On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
>>> Message-Id: <Y4KvI.283117$ImK8....@fx04.ams1>:
>>>> On 2021-06-08 4:39 a.m., Anonymous wrote:
>>>>> Which command on the command line updates mlist2.txt and pubring.mix ?
>>>>>
>>>>
>>>> That's a good question. I struggled with this one too. The only method
>>>> that worked for me was to actually send out a message.
>>>>
>>>> yamn --mail message.txt
>>>>
>>>> This guarantees that your stats and keys will get updated.
>>> Hi,
>>>
>>> Yes, you're right, there is no manual option to update stats and
>>> keyrings. On every message send, it checks to see if the stats/keys are
>>> more than 1 hour old and updates if they are.
>>>
>>> I've added an option to provide a manual means to refresh stats and
>>> keyrings:
>>>
>>> yamn --refresh
>>>
>>> This is compiled against Go 1.16.4 and incorporates current versions of
>>> all the dependency libraries.
>>> https://github.com/crooks/yamn
>> Updated sec3's YAMN Tutorial link (Remailer Section) for the new binaries.
>
> Direct link, for the binaries:
>
> <https://ipfs.io/ipfs/QmWwAFM5p1RkokAZhttfSExzc7BHnAhrxCjSHatqXAEFZX/yamn-master/binaries>
>

Thank you for this, Stefan.

--
SEC3

On Saturday, June 26, 2021 at 10:39:14 PM UTC+2, SEC3 wrote:
> On 2021-06-26 11:39 a.m., Stefan Claas wrote:

> >> Updated sec3's YAMN Tutorial link (Remailer Section) for the new binaries.
> >
> > Direct link, for the binaries:
> >
> > <https://ipfs.io/ipfs/QmWwAFM5p1RkokAZhttfSExzc7BHnAhrxCjSHatqXAEFZX/yamn-master/binaries>
> >
> Thank you for this, Stefan.

You're welcome, sec3.

Regards
Stefan

In article <PfMBI.68805$Ob1.57762@fx13.ams1>
SEC3 <admin@sec3.net> wrote:
>
> On 2021-06-26 11:39 a.m., Stefan Claas wrote:
> > On Saturday, June 26, 2021 at 5:37:58 PM UTC+2, Stefan Claas wrote:
> >> On Saturday, June 26, 2021 at 1:37:44 PM UTC+2, Zax wrote:
> >>> -----BEGIN PGP SIGNED MESSAGE-----
> >>> Hash: SHA256
> >>>
> >>> On Tue, 8 Jun 2021 09:16:39 -0400, SEC3 wrote in
> >>> Message-Id: <Y4KvI.283117$ImK8....@fx04.ams1>:
> >>>> On 2021-06-08 4:39 a.m., Anonymous wrote:
> >>>>> Which command on the command line updates mlist2.txt and pubring.mix ?
> >>>>>
> >>>>
> >>>> That's a good question. I struggled with this one too. The only method
> >>>> that worked for me was to actually send out a message.
> >>>>
> >>>> yamn --mail message.txt
> >>>>
> >>>> This guarantees that your stats and keys will get updated.
> >>> Hi,
> >>>
> >>> Yes, you're right, there is no manual option to update stats and
> >>> keyrings. On every message send, it checks to see if the stats/keys are
> >>> more than 1 hour old and updates if they are.
> >>>
> >>> I've added an option to provide a manual means to refresh stats and
> >>> keyrings:
> >>>
> >>> yamn --refresh
> >>>
> >>> This is compiled against Go 1.16.4 and incorporates current versions of
> >>> all the dependency libraries.
> >>> https://github.com/crooks/yamn
> >> Updated sec3's YAMN Tutorial link (Remailer Section) for the new binaries.
> >
> > Direct link, for the binaries:
> >
> > <https://ipfs.io/ipfs/QmWwAFM5p1RkokAZhttfSExzc7BHnAhrxCjSHatqXAEFZX/yamn-master/binaries>
> >
>
> Thank you for this, Stefan.

+ 1

>
>> Will you also compile the program for us stupids Windows users ?
And publish
>> the Windows version on http://news.mixmin.net/ ?
>
> Hi, I'll try and do this tomorrow. I have to dust off a Windows
PC,
> patch it and get the latest Go binaries installed.
>
Could you also put in a switch in the yamn.cfg file to bypass the
AUTH routine in mail.go?

// If AUTH is supported and a UserID and Password are configured,
try to

// authenticate to the remote MTA.

On Sat, 26 Jun 2021 Zax <admin@mixmin.net> wrote in Message-Id:<slrnsdeu18.fqr.admin@fleegle.mixmin.net>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> On Sat, 26 Jun 2021 17:23:39 +0000, YAMN USER wrote in
> Message-Id: <f5887d0f5ca6d4356a46c219c5ad53f3@msgid.frell.theremailer.net>:
>
> > Will you also compile the program for us stupids Windows users ? And publish
> > the Windows version on http://news.mixmin.net/ ?
>
> Hi, I'll try and do this tomorrow. I have to dust off a Windows PC,
> patch it and get the latest Go binaries installed.
>

TIA

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On Sat, 26 Jun 2021 18:55:36 -0000 (UTC), Zax wrote in
Message-Id: <slrnsdeu18.fqr.admin@fleegle.mixmin.net>:

>
> On Sat, 26 Jun 2021 17:23:39 +0000, YAMN USER wrote in
> Message-Id: <f5887d0f5ca6d4356a46c219c5ad53f3@msgid.frell.theremailer.net>:
>
>> Will you also compile the program for us stupids Windows users ? And publish
>> the Windows version on http://news.mixmin.net/ ?
>
> Hi, I'll try and do this tomorrow. I have to dust off a Windows PC,
> patch it and get the latest Go binaries installed.

Sorry, bit slower than promised!
https://www.mixmin.net/yamn.exe

I've compiled this and run a few basic commands but not tried it in a
server environment. Please let me know if there are any issues.

-----BEGIN PGP SIGNATURE-----
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=s/3t
-----END PGP SIGNATURE-----

--
pub 1024D/228761E7 2003-06-04 Steven Crook <steve@mixmin.net>
Key fingerprint = 1CD9 95E1 E9CE 80D6 C885 B7EB B471 80D5 2287 61E7
ssb rsa4096/832C8F4DCD904263 created: 2019-05-04 expires: 2024-05-02 usage: S

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On Sat, 26 Jun 2021 18:36:06 -0500, EECL wrote in
Message-Id: <sb8dl6$qgs$1@news.mixmin.net>:

> Could you also put in a switch in the yamn.cfg file to bypass the
> AUTH routine in mail.go?
>
> // If AUTH is supported and a UserID and Password are configured,
> try to
>
> // authenticate to the remote MTA.

Hi, happy to do this but can't the same be achieved by not configuring a
UserID and Password?

-----BEGIN PGP SIGNATURE-----
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=Xq/Y
-----END PGP SIGNATURE-----

--
pub 1024D/228761E7 2003-06-04 Steven Crook <steve@mixmin.net>
Key fingerprint = 1CD9 95E1 E9CE 80D6 C885 B7EB B471 80D5 2287 61E7
ssb rsa4096/832C8F4DCD904263 created: 2019-05-04 expires: 2024-05-02 usage: S

>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> On Sat, 26 Jun 2021 18:36:06 -0500, EECL wrote in
> Message-Id: <sb8dl6$qgs$1@news.mixmin.net>:
>
>
>> Could you also put in a switch in the yamn.cfg file to bypass
the
>> AUTH routine in mail.go?
>>
>> // If AUTH is supported and a UserID and Password are configured,
>> try to
>>
>> // authenticate to the remote MTA.
>
> Hi, happy to do this but can't the same be achieved by not
configuring a
> UserID and Password?
>
It doesn't seem to work without a UserID and Password. It won't
connect using the inwtx interface.

In article <20210613.103344.84ef1931@mixmin.net>
Anonymous Remailer <remailer@domain.invalid> wrote:
>
> SEC3 wrote:
> >
> >> Which command on the command line updates mlist2.txt and pubring.mix ?
> >>
> >
> > That's a good question. I struggled with this one too. The only method
> > that worked for me was to actually send out a message.
> >
> > yamn --mail message.txt
> >
> > This guarantees that your stats and keys will get updated.
> >
> > --
> > SEC3
>
> No elegant solution !

It's not supposed to be.